工业园区混合能源优化配置方法应用与实践

为了充分挖掘多能源之间的互补潜力,使工业园区混合能源系统的配置方式由传统粗放式转变为精确优化配置并降低系统配置方案的保守性,基于粒子群联合CPLEX求解算法对工业园区的系统配置和运行调度方案进行分析优化,并以某生物园区为例进行了实例分析,得到了目标函数下的最优设计方案和运行策略。仿真分析结果表明,优化配置方法的应用能够协调冷热电多种能源的混合利用,提升系统的综合经济性。同时,为工业园区能源供应项目的规划、设计提供参考性支撑,丰富设计手段。     

Silica-supported carboxylated cellulose nanofibers for effective lysozyme adsorption: Effect of macropore size

Engineering hierarchical macro/mesoporous structures that offer an abundance of accessible binding sites are highly desirable in protein adsorption processes. However, numerous significant challenges remain. Herein, cellulose nanofiber (CNF)-loaded macroporous silica (CNF-MPS) particles were successfully synthesized with a high degree of accessible binding sites by tuning the macropore size of the silica particles and loading a highly carboxylated CNF via smart and rational design. The as-prepared CNF-MPS particles exhibited a high negative charge (~−59 mV) and excellent protein adsorption ability (>1000 mg/g) in <5 min. Furthermore, tuning the macropore size influenced the CNF deposition either to the external surface or penetrating within the pores. As a result, the optimum macropore successfully enhances the adsorption capability to >1500 mg/g as a result of improved interconnectivity between the channels. Here exposed macropores of >100 nm allows ingress of protein to the interior structure that houses an abundance of binding sites comprising the dispersed CNF. Additionally, the adsorption kinetics, thermodynamics, and isothermal parameters were studied to analyze the mechanism of lysozyme adsorption. The adsorption process is confirmed to occur spontaneously at any temperature with a pseudo-second-order model describing the kinetic model, and CNF deposition affecting the heterogeneity of the binding sites.     

A numerical modelling approach to assess the behaviour of underground cavern subjected to blast loads

The paper gives an insight into the behaviour of large underground caverns which are subjected to blast loads. Caverns are generally constructed in hard rock formation which compels us to use blasting methods for the excavation works. Comparative study was done between models with intact rock mass and discontinuities to assess the stability of cavern as a result of blast loads. Numerical modelling was performed with 3 dimensional distinct element code(3 DEC) to analyse the performance of cavern walls in terms of displacement and to compute peak particle velocities(PPV) both around the cavern periphery and at surface of models. Results showed that the velocity wave with higher frequency exhibited large displacements around the periphery of cavern. Computation of PPV showed that model with horizontal joint sets showed lower PPV in comparison to model with intact rock mass. PPV values were also analysed on the surface for model consisting vertical joints spaced at 4 m intervals. Comparative study of PPV on surface vertically above the blast location between models with horizontal joints spaced at 4 m and vertical joints at 4 m intervals were conducted. Results depicted higher magnitudes of PPV for model with vertical joints in comparison to model with horizontal joints.     

高落差粉尘扩散规律和分布特征

高溜井放矿过程中会形成强大的冲击气流引起粉尘扩散，造成严重的井下环境污染，对其进行有效治理一直是井下通风除尘的工作重心，本工作利用相似实验和数值模拟相结合的方式探究溜井放矿过程中粉尘的扩散规律和分布特征。通过改变放矿质量、矿石粒径、溜井密闭程度、含水率等因素测试不同条件下气流大小和粉尘浓度分布，并利用CFD-DPM耦合方法模拟卸矿过程中的气?固两相流，研究气流和粉尘浓度时空分布特征。结果表明，最大粉尘浓度和风速随放矿质量增加而上升，随颗粒粒径和溜井密闭程度增大而降低，且含水率越大，粉尘浓度越小，风速无明显变化，在放矿过程中矿石颗粒之间碰撞占主导作用，颗粒流呈横向分布。     

小粒径油雾发生装置研制

针对现有的油雾发生装置油雾粒径(7~40 μm)不符合中国船级社《钢制海船入级规范》关于油雾发生装置油雾粒径不得超过5 μm的规范要求,研制了一种小粒径油雾发生装置。经测量验证:所研制的油雾发生装置油雾粒径可控制在5 μm以内，并能控制油雾浓度、雾化温度及油雾流量，可为油雾探测器研制提供平台试验条件。     

Effect of Kollidon VA®64 particle size and morphology as directly compressible excipient on tablet compression properties

The study evaluates use of Kollidon VA^®64 and a combination of Kollidon VA^®64 with Kollidon VA^®64 Fine as excipient in direct compression process of tablets. The combination of the two grades of material is evaluated for capping, lamination and excessive friability. Inter particulate void space is higher for such excipient due to the hollow structure of the Kollidon VA^®64 particles. During tablet compression air remains trapped in the blend exhibiting poor compression with compromised physical properties of the tablets. Composition of Kollidon VA^®64 and Kollidon VA^®64 Fine is evaluated by design of experiment (DoE). A scanning electron microscopy (SEM) of two grades of Kollidon VA^®64 exhibits morphological differences between coarse and fine grade. The tablet compression process is evaluated with a mix consisting of entirely Kollidon VA^®64 and two mixes containing Kollidon VA^®64 and Kollidon VA^®64 Fine in ratio of 77:23 and 65:35. A statistical modeling on the results from the DoE trials resulted in the optimum composition for direct tablet compression as combination of Kollidon VA^®64 and Kollidon VA^®64 Fine in ratio of 77:23. This combination compressed with the predicted parameters based on the statistical modeling and applying main compression force between 5 and 15?kN, pre-compression force between 2 and 3?kN, feeder speed fixed at 25?rpm and compression range of 45–49?rpm produced tablets with hardness ranging between 19 and 21?kp, with no friability, capping, or lamination issue.     

Precisely Controlled Microsphere Design via Visible‐Light Cross‐Linking of Functional Prepolymers

A new strategy for particle synthesis is enabled by utilizing modern synthetic, polymer, and photochemical techniques to facilitate the synthesis of highly narrow–disperse multifunctional microspheres from visible‐light induced crosslinking of prepolymers in both a single and dual polymer system. The approach requires no stabilizers, bases, or initiators, and proceeds at ambient temperature to yield microspheres with a tunable size range (0.25–5 µm) in less than 4 h, depending largely on solvent composition, but also polymer concentration (2–10 mg mL^?1), ratio, and irradiation intensity (3–20 W). Critically, the visible‐light induced dimerization reaction exploited herein enables simple functional particle syntheses via a single polymer system. Underpinned by an in‐depth kinetic analysis of the particle formation as well as a detailed small molecule study, the mechanism for particle formation is also elucidated. Importantly, inherent advantages of the system are exploited for surface functionalization of residual acrylate and hydroxyl groups (generating inherently fluorescent particles).     

Multi-objective particle swarm optimisation based integrated production inventory routing planning for efficient perishable food logistics operations

Sustainable and efficient food supply chain has become an essential component of one’s life. The model proposed in this paper is deeply linked to people's quality of life as a result of which there is a large incentive to fulfil customer demands through it. This proposed model can enhance food quality by making the best possible food quality accessible to customers, construct a sustainable logistics system considering its environmental impact and ensure the customer demand to be fulfilled as fast as possible. In this paper, an extended model is examined that builds a unified planning problem for efficient food logistics operations where four important objectives are viewed: minimising the total expense of the system, maximising the average food quality along with the minimisation of the amount of CO₂ emissions in transportation along with production and total weighted delivery lead time minimisation. A four objective mixed integer linear programming model for intelligent food logistics system is developed in the paper. The optimisation of the formulated mathematical model is proposed using a modified multi-objective particle swarm optimisation algorithm with multiple social structures: MO-GLNPSO (Multi-Objective Global Local Near-Neighbour Particle Swarm Optimisation). Computational results of a case study on a given dataset as well as on multiple small, medium and large-scale datasets followed by sensitivity analysis show the potency and effectiveness of the introduced method. Lastly, there has been a scope for future study displayed which would lead to the further progress of these types of models.     

Enhanced green upconversion luminescence properties of Er3+/Yb3+ co-doped strontium gadolinium silicate oxyapatite phosphor

Upconversion Sr₂(Gd_.98-xEr_.02Yb_x)₈Si₆O₂₆ (SGSO:2Er³⁺/xYb³⁺) phosphor materials were synthesized using a citrate sol-gel process. X-ray diffraction patterns confirmed their hexagonal structure. Field emission scanning electron microscopy images of SGSO:2Er³⁺/xYb³⁺ phosphors depicted submicron particles. The enhanced upconversion luminescence properties of SGSO:2Er³⁺/xYb³⁺ phosphors were analysed as a function of Yb³⁺ ion concentration and laser power. The energy transfer induced enhanced emission of the Er³⁺/ Yb³⁺ ions co-doped SGSO phosphors was ascribed to multi-phonon relaxation. The calculated chromaticity coordinates of the SGSO:2Er³⁺/xYb³⁺ phosphors showed emissions could be tuned by changing Yb³⁺ ion concentration. Optimized sample exhibited the chromaticity coordinate values near to the ultra-high definition television standard green emission coordinates.